Professional Cutters for Skin STALEKS (Staleks) PRO SMART 10 Cutting Part 4 mm

Staleks Pro Smart 10 professional cuticle nippers NS-10-4 are designed for trimming cuticles and rough skin during classic and combined manicure/pedicure procedures. Hand-sharpened with a rounded profile, they cut the cuticle precisely and neatly, leaving no burrs or unevenness.

The Staleks PRO SMART 10 NS-10-4 nippers belong to the professional series, allowing for frequent sterilization and disinfection without loss of properties.

Cutting Edges and "Heel"

The Staleks Smart 10 NS-10-4 nippers feature straight cutting edges that are 4 mm long. The master sharpens them under a microscope on diamond wheels to achieve a smooth, neat cut during manicure, without cuts or burrs. After sharpening, the tool remains sharp for a long time, even under heavy use. The cutting part has a protrusion ("heel") above the plane of the hinge, allowing for easy handling of skin of varying thickness and making deeper cuts.

Shape and Length of Handles

The Staleks Pro Smart 10 NS-10-4 professional cuticle nippers have straight, short handles that are comfortable to work with, easily fixed between the fingers and the palm. The tool does not slip and does not require excessive effort for a reliable grip, reducing hand fatigue under heavy loads.

Spring of the Nippers

The spring of the NS-10-4 nippers consists of two plates, providing a soft action for the tool. It closes easily, allowing control over the pressure applied and the precision of the cut. The hinges operate smoothly, evenly distributing the load between the handles.

Staleks PRO Smart 10 NS-10-4 Cuticle Nippers: Material

The Staleks Smart 10 nippers are made of high-alloy stainless surgical steel. This durable metal has a high chromium content, making it resistant to deformation and wear even with active use. The steel cutting edges retain their sharpness for a long time and are designed for precise and careful cutting without excessive effort.

The metal withstands contact with water and chemicals. The surface of the Staleks Pro Smart 10 is polished to a shine in two stages: on a grinding-flap wheel with grit to eliminate roughness, and then with GOI paste to add gloss and corrosion protection. After this, galling—a high-tech grinding process—and sandblasting are performed to achieve a matte finish. The matte coating is scratch-resistant, and any marks on it are less noticeable. The nippers feel pleasant to the touch and look stylish and attractive.

Staleks Pro Smart 10 Professional Cuticle Nippers NS-10-4: Design Features

• professional cuticle nippers;
• type of return spring – double, made of two metal plates;
• handle shape – straight, short;
• cutting part with a protrusion - "heel";
• smooth and easy action due to precise fitting and grinding of the hinge surfaces;
• original inverted rivet simplifies maintenance;
• blade length – 4 mm;
• cutting edges – angled;
• tool length – 10.5 cm;
• weight – 40 g;
• handle length from hinge – 8.7 cm;
• with matte finish;
• material – stainless surgical steel;
• passivation (treatment with special solutions) and processing with GOI paste for corrosion resistance;
• number of usage cycles before the next sharpening – 25,000.

Cleaning the Tool 

Professional manicure nippers must be cleaned and disinfected after each use. For the safety of the master and clients, cleanliness on the work table should be maintained, and all stages of disinfection and sterilization should be followed. Additionally, gloves and masks should be used. Let us consider the processing steps in detail.

Step 1. Disinfection. This is carried out to destroy pathogenic and conditionally pathogenic microorganisms, as well as to reduce the number of fungal spores. For this, the nippers should be immersed in a disinfecting solution, for example, Staleks Pro disinfectant. Then, follow the manufacturer's instructions for the solution. The usual processing time is 15-30 minutes. When purchasing disinfectants, it is better to choose those whose instructions indicate effectiveness against hepatitis B, C viruses, and dermatophytes. Disinfection can be combined with washing in special machines to eliminate blood and dirt particles using vibration.

Step 2. Washing. To remove residues of the chemical solution, rinse the tool with water and a special detergent manually, or use a washing machine. In the areas of hinges and other connections, use special brushes with plastic bristles, handling the cutting parts carefully. An ultrasonic cleaner can also be suitable for cleaning.  

Step 3. Drying. To dry the nippers, carefully lay them open, cutting edge up, on disposable paper towels, then place them in kraft bags. The tool must be completely dry, as any moisture remaining during subsequent sterilization can lead to corrosion.

Step 4. Sterilization. Destroys not only bacteria but also viruses and fungal spores. Follow the manufacturer's instructions for the sterilizer or solution. Sterilization can be physical or chemical. Physical – hot, using high temperatures in steam equipment (autoclave) or dry heat (dry oven), chemical – cold, using specialized chemical solutions.

Recommendations for Sterilization and Disinfection:

1. Despite the anti-corrosion coating of Staleks Pro nippers, they should not be soaked in water for extended periods, as this will reduce the anti-corrosion protection. 
2. Use a disinfectant designed for metal tools. Aggressive substances such as acetone and alkali should not be used for treating tools.
3. Use a special container for chemically aggressive agents. The disinfecting solution should cover the nippers by at least 1 cm, with concentration and exposure time indicated on the product packaging.
4. After disinfection, thoroughly clean the nippers from any remaining solution, as it may cause corrosion later.
5. After sterilization, leave the tool in the dry oven or autoclave until completely cool, as a sudden temperature change may disrupt the physical properties of the steel, requiring more frequent sharpening.
6. Fill the sterilizer to 70% to avoid blocking ventilation holes, and stack kraft bags in a single layer.
7. After sterilization, check external indicators that will change color upon successful completion of the procedure. Open and remove the sterile tool right before the client.